¿Alguna vez te preguntaste cómo podrías prender una computadora remotamente?
Bueno, con este programa podés hacerlo!
C:\>wol Wake-On-Lan (WOL) Tool v1.0 by NeoEGM http://www.neoegm.com/software/wake-on-lan/ ------------------------------------------- Usage: wolWakes the computer with the specified MAC address. Accepted MAC address formats: 01-4B-8E-00-52-A1 01-4b-8e-00-52-a1 01:4B:8E:00:52:A1 01:4b:8e:00:52:a1 014B.8E00.52A1 014b.8e00.52a1 014b8e0052a1 014B8E0052A1
Tenés que configurar la computadora remote (la que va a ser prendida) para que soporte la funcionalidad Wake-On-LAN. Esto se realiza desde la configuración de la CMOS buscando la sección de “Power/ACPI” o algo por el estilo.
Luego, tenés que averiguar la dirección MAC (a veces llamada “Dirección Física”) de la placa de red conectada a la red. En Windows esto es realizado haciendo esto en la consola:
C:\>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : mypc1 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 00-1F-C2-14-B3-F4 DHCP Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.0.1 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.0.254 DNS Servers . . . . . . . . . . . : 192.168.0.254
En este caso, es “00-1F-C2-14-B3-F4″, así que el programa puede ser utilizado así:
C:\>wol 00-1F-C2-14-B3-F4 Wake-On-Lan (WOL) Tool v1.0 by NeoEGM http://www.neoegm.com/software/wake-on-lan/ ------------------------------------------- Wake-up packet sent to MAC address 00-1F-C2-14-B3-F4.
Hay algunas restricciones que aplican al hardware, pero un resumen podría ser: la mother debe soportar la funcionalidad “Wake-On-Lan (WOL)” y la placa de red debe tener un cable llamado de ese modo conectado a la mother. Si la mother de la computadora que querés prender no es demasiado vieja y tiene una placa de red integrada (on-board), entonces probablemente funcione.
WakeOnLan está liberado bajo una licencia GNU GPL v3 (attached)…
Ahora, los links…
Support appreciated!
All the content offered in this website is, except noted otherwise, of free nature. This means you can share it wherever you want if you do it freely and stating its source.
If it was useful for you and you’d like to contribute, you can make a donation or, at least, visit one of our advertisers of your choice; they are all around the site.
Incoming search terms for the article:
- marvell yukon 88E8056 wake on lan
- marvell yukon 88e8056 wol
- wake on lan GPL
- wake on lan C
- Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller WAKE ON LAN
- Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller WOL
- 88e8056 wol
- Marvell 88E8056 Wol
- Marvell 88E8056 wake on lan
- marvell yukon wake on lan
Técnicas Arcturianas
Traducción de la Luz
I’m using Network Shutdown Tool on my domain. It’s program can wake up, reboot, sutdown multiple computers simultaneously.
Alright, but the software you’re publicizing is a paid software.
This one is freeware and open source. And you can easily write batch jobs which power on multiple computers. To power them off or reboot them, you can use the “shutdown” command in the same way if they are running Windows, otherwise, you can use ssh.
Thanks anyway.
Great, thanks, but the steps followed here (but using your software instead) will do the trick ?
http://onlineforall.info/2010/08/how-to-wake-your-pc-on-lan/
Yeah, it’s the same.
Greetings.
Only that my software can be called in batch mode and from scripts and is offered with source code.